Holden Colorado and Rodeo Remote Programming

IMPORTANT NOTE: Ensure that all doors are closed and unlocked before beginning this procedure. 1. Open driver's side door and insert key into the ignition. 2 Turn the key from "OFF" to "ON" 3 times withing 5 seconds, returning to the "OFF" position after the final turn. 3. WITHIN 5 SECONDS: Close and Open the driver's side door 2 times. 4. Wait 8 seconds before continuing on to step 5 (this wait time is a crucial step, please time it accurately). 5. Turn the key from "OFF" to "ON" 3 times leaving it in the "ON" position on the final turn. 6. Close the driver's side door, the hazard lights will now flash 3 times to indicate that the vehicle is in programming mode. 7. Press the Lock or Unlock button on the new remote to be programmed in. The hazard lights will flash once to confirm programming of the new remote is successful.