Toyota Remote Programming (Most of Toyota Cars)

You need a master key to process this. 1. Open the driver side door and sit. (Leave the door open) 2. Put the key in ignition and remove x 2 (don't turn on , just slide in and out twice) 3. Close driver door and open x2 (at the last action, leave door open) 4. Put the key in ignition and remove x1 (don't turn on, just slide in and out once) 5. Close driver door and open x 2 6. Close the driver door 7. Put key in ignition and turn on (1 second) and turn off and remove the key 8. Door lock should be cycle to indicate the car is in programming mode (if you don't see any reaction from the car, it means it is not into programming mode so do from the start again) 9. Press and hold Lock & Unlock button together about 2 seconds and release. And then press Unlock button. (You will hear door lock cycles which means it is accepted) 10. If you have more remotes do "No.9" step 11. Open the driver door to exit the programming